Liquid error (snippets/image-element line 103): invalid url input
Customer must be over 18 years old.
Highly Flammable. Do not use near fire or flame. Do not incinerate or puncture this can even when empty. Keep in a cool place out of the sun. Do not store above 50 degrees. Spray away from the eyes.
Intentional misuse deliberately concentrating and inhaling contents can be harmful or fatal.
Not recommended for automotive use
Volume: 250 grams per can
High quality, quick-drying spray enamel
Use for interior & exterior applications
2 triggers making 3 patterns
Non toxic and lead free
Surface preparation: Surface must be free of grease, wax, rust, dirt and dust. Sand surfaces to remove contaminants and flaking paint, then dust off. Prime all bare timber and metal surfaces with Australian Export Grey Primer, then sand the dry primer surface lightly to level.
Adjustable Spray: The fan jet may be adjusted for horizontal or vertical spraying by lifting the complete head and turning the jet. Replace head before spraying.
Application: Shake the can thoroughly for 1 minute or until the ball rattles inside the can. Hold can approximately 30cm from surface and apply one mist coat by spraying in a continuous motion across the surface working downwards. Allow 30 seconds for the solvent to flash off. Apply an additional 2 coats in the same manner. If higher film thickness is desired, apply additional light coats and allowing adequate drying between coats. Recoat after 1 hour. After use, turn the can upside down and spray until clean gas is expelled.
Clean-up: Clean with Mineral Turps or General Purpose Thinners.
Notes: Compatible with most other paint surfaces. However, test for adhesion by applying on a small area first.
We are happy to offer a 30-day return policy, which means that if you are dissatisfied with your purchase, you may return it within 30 days from the day you received it for a full refund.